Sight Helper Premium

Features Sight Helper Premium

Sight Helper Premium can be used to monitor multiple bluetooth devices (up to 8) at the same time, which is helpful to take care your belongings or beloved when the device is attached or worn.Often, one needs to focus on the work, job, or whatever it is, and has no time to monitor and supervise others.
Sight Helper can help you to keep your kids, pets, bags or things that you named it away from lost and perpetrator in vincinity when you are busy even when you are sleeping and cannot keep your eyes on.
The App is convenient for multitasking.The App detects distance between your mobile phone / tablet and devices such as health band, wrist band, smart watch, or another mobile phone while the bluetooth is turning on.
The App triggers an alarm when the device worn by a person or attached object goes too far away.Features:- suitable for Bluetooth Low Energy (BLE) capable device- detects up to 8 devices- message guidance- color labels- time tracing display- 3 zones to show distance- alerting alarm- continuous operation when Recent, Home, or Back button is pressed or screen is turned off- calibration for each individual deviceInstruction:(1) The user needs to pair the device first by long-pressing the Bluetooth icon.(2) If the device is already paired, the user has to make sure the Bluetooth is always turning on while the App is in use.(3) The user should perform following steps at an open area without obstacle.
The direct distance may be shorter if there is obstacle in between devices.(4) In the SETTING mode, the user can add preferred device from the list of paired devices.
The Bluetooth Low Energy (BLE) devices are available for selection only.
The user can add up to 8 devices for calibration only.(5) When a device is added, the user can tap this device name as indicated in the list pending for calibration.
Then, the READY button is pressed to begin the calibration process.
Each device can be re-calibrated and the previous reading is replaced, if the selected device has been performed before.
When the “Don’t move” is shown, the user has to wait for the message, then slowly walk away a distance during the calibration process; finally, the App shows “calibration done” and calibrate internally for each device when the range limit is detected, then the user can stop walking and press the FINISH button to go back to main menu.
The user can use ADD or REMOVE button to change new devices.(6) The user should not turn off the device or press navigation button during calibration or the setting may be inaccurate.
Please follow the message as indicated.(7) The user may need to test the alarm after calibration by separating the devices again.(8) In the main menu, when the START button is pressed, the user can select up to 8 maximum calibrated devices.
After selection confimation, the App will communicate with devices.
Each device has different color of displaying dots on the screen.
The displaying dots may not show up at the same time initially; the user needs to wait for a moments before the connection is established, and re-start of worn device and bluetooth may be necessary if no sign is displayed on screen for a long time.
A prolonged alarm will be triggered when the dot exceeds the “Further” zone, which indicates the user has moved too far away.
The user can view and track the target when the alarm is triggered.
The displaying dots disappear if the power of device is turned off; however, the alarm is still being triggered when the worn device goes out of range and the signal is gone.
The communication is automatically established when the devices is coming into range again.
The alarm remains sounding until the device is approached.(9) The App continues running eventhough Recent, Home, Back button is pressed or when screen is turned off.
The only way to switch off the App is by pressing EXIT button of App or Close button of system menu.
The user is reminded to press the button in order to save power.